ELITE2 by Phoenix Gold - Elite 1000W 2 Channel Amplifier

Elite 1000W 2 Channel Amplifier

Phoenix Gold ELITE2

ELITE.2, 2 channel amplifier delivers massive power and quality in either a two speaker build or bridged for single or multiple subwoofer installation. Featuring 8 Sanken dual package output devices (more commonly found in the high end home audio amplifiers) that are more than 12 times faster and cover two and a half times more surface area to transfer heat, than standard amplifier output devices, resulting in the highest possible sound quality, dynamic performance and reliability available in a car audio amplifier. The result is musical perfection with enhanced tonal accuracy and true timbre.

Key Specs

Class A/B Topology
Power Rating: 250 x 2 @ 4 ohms Stereo 400 x 2 @ 2 ohms Stereo 500 x 2 @ 1 ohm Stereo 800 x 1 @ 4 ohms Bridged 1000 x 1 @ 2 ohms Bridged
Dimensions: 23.3 L x 10.5 W x 2.6 H - 592mm L x 267mm W x 66mm H

Premium Build Quality for Ultra Performance

Burr Brown op-amps provide ultra low distortion and maximum resolution in the pre-amp circuitry and combined with Monolithic audiophile-grade signal capacitors provide frequency response past 50kHz
High current nickel plated buss bars connections ensure proper energy transfer
Legendary Phoenix Gold massive dual unregulated power supplies are built for dynamic headroom and to drive low 1ohm impedance loads
Ultra low ESR and high energy secondary capacitors deliver maximum dynamic performance
Nickle plated panel mounted RCA connections ensure signal purity and provide a high quality connection
Clip light indicators ensure the amplifier reaches maximum undistorted output
Sanken Dual Package Output Devices (more commonly found in the high end home audio amplifiers) are more than 12 times faster and cover two and a half times more surface area to transfer heat, than standard amplifier output devices, resulting in the highest possible sound quality, dynamic performance and reliability available in a car audio amplifier
Power supply transformers are hand wound, featuring a third windings (as opposed to the standard two) to ensure higher efficiency and lower operating temperatures
High temperature and heavy duty Tombstone balancing resistors buffer the Sanken output devices

Chassis Features

The fan cooling system is ultra quiet and its speed is temperature controlled. Air is forced across the internal heatsink and exhausts out the sides. The end user has the option to manually control the fan mode via the end panel switch
Extruded Aluminum Heatsink with Evenflow Technology
Exhaust vents are built into the endcaps. Airflow from the cooling system is pushed across the internal heatsink fins and exhausts out the side vents
The power supply is loaded with 16 IRF-3205 high current and high speed MOSFETs. They are clamped to the heatsink using precision aluminum extrusions for dual heatsinking and lower power supply operating temperatures

Total Control of Your Music Output

Variable filters on each channel allow you to fine tune your musical output to the precision you demand. All crossovers feature aluminum shaft precision potentiometers with 41 detents for exact crossover frequency selection.

Instruments and vocals are passed through with clarity to your front and rear channels with a Front/Rear High Pass Crossover Range of 20Hz to 4kHz
With a Rear Low Pass Crossover Range of 40Hz to 4kHz, you get quality lower bass notes and Rear Band Pass Crossover Range of 20Hz to 4kHz for midrange or midbass in active applications

Frequency Response	1dB from 10Hz to 50kHz
Signal to Noise Ratio	>110dB
High and Low Pass Crossovers	18dB per Octave
Front/Rear High Pass Crossover Range	20Hz to 4kHz
Rear Low Pass Crossover Range	40Hz to 4kHz
Low Level Input Range	200 millivolts to 8 volts
Lowest Recommend Load	2 ohms Bridged or 2 ohms Stereo
Damping Factor	Greater than 200
Typical Efficiency	55%
RMS Power 14.4Vdc 1% THD	250 x 2 @ 4 ohms Stereo 400 x 2 @ 2 ohms Stereo 500 x 2 @ 1 ohm Stereo* 800 x 1 @ 4 ohms Bridged 1000 x 1 @ 2 ohms Bridged*

Quick Specs

Appearance
Type: Amplifiers

DOWNLOAD MANUAL

GAINS ADJUSTMENTS

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.